How to Store a Sex Doll Torso Without Damaging It

Store a torso flat, dry, powdered and out of direct sunlight — and match the storage method to its weight, because our torsos range from 2.1 kg to 28 kg and a butt mold and a 28 kg half body have almost nothing in common. Nearly every storage mistake people make comes from treating all torsos the same.

Below is what actually works, split by the three weight classes we sell.

First: know which class yours is in

Class	Weight range	Examples	Price range
Compact	2.1 – 6 kg	BM-02 to BM-13 butt molds, LM-01/02 leg molds, HB-26/27/28	$109 – $209
Mid	6 – 13 kg	HB-07 to HB-09, HB-20 to HB-24, LM-03/04, BM-01/10/12	$209 – $489
Full-size half body	14 – 28 kg	HB-02, HB-03, HB-05, HB-12 to HB-19, HB-36	$569 – $1,099

Compact torsos (2–6 kg): drawer or box storage

At this weight you have the easiest storage problem in the entire product category.

• A lidded plastic box on a shelf or in a wardrobe. Nothing else needed.
• Wrap in a clean cotton cloth or non-woven bag first — never a sealed plastic bag.
• Keep the original carton if you have space; it is shaped correctly and cost nothing.
• Stack nothing on top. A 3 kg butt mold will flatten permanently under a stack of books.

Mid-weight torsos (6–13 kg): under-bed or wardrobe floor

• Under-bed storage box with wheels. This is the single best answer for this class — out of sight, one motion to retrieve, and it keeps the torso flat.
• Wardrobe floor in a lidded box also works, but you will use it less because retrieving it is more effort than rolling out a drawer.
• Check the underside of the box for ventilation holes. Sealed totes trap moisture, and trapped moisture is how mold starts.
• If you store it upright against a wall, rotate it. Anything leaning on one edge for months will develop a flat spot.

Full-size half bodies (14–28 kg): this needs planning

A 28 kg half body (HB-36) is heavier than plenty of full-size dolls. Treat it like furniture, not like a toy.

• Rolling under-bed box or a storage ottoman. You need wheels at this weight — dragging it will scuff the skin.
• Flat, always. These have a broad flat back and are stable lying down. Standing them is not stable and not advisable for more than a few hours.
• If it has a head, remove and store it separately. The neck connector is the most fragile point and should not carry load in storage.
• Do not hang it. Half bodies have no load-bearing hanging point. Hanging is a solution for full-size dolls only — see standing vs hanging storage.

The five rules that apply to every class

1. It must be completely dry before it goes away

This is the rule that matters most. Any moisture left in the internal channel will grow mold in a closed box, and mold inside a channel is not something you can clean out. Dry it thoroughly — see how to clean a torso — then leave it in open air for a few hours before boxing it.

2. Powder it

A light coat of renewal powder before storage keeps the surface from going tacky and stops the skin from adhering to itself or to the cloth. Cornstarch works; talc is unnecessary. Re-powder when it comes back out.

3. Rotate it

TPE left in one position for months develops a permanent flat spot. Turn it over roughly every 3–4 weeks. Silicone holds shape far better and can go a couple of months, but rotating costs nothing so just do it.

4. Keep it away from heat and light

No direct sunlight — it yellows TPE and fades silicone paint over time. No radiators, no hot water tanks, no loft space in summer, no car boot. Room temperature, dark, dry.

5. Watch what it touches

TPE absorbs dye. Dark clothing, coloured towels, printed fabric — all of it can permanently stain a TPE torso in a matter of days. Store it wrapped in white or undyed cotton, never against coloured fabric. Silicone is much more resistant, but wrap it anyway.

What not to do

• Don't seal it in plastic. Vacuum bags and sealed bin liners trap humidity. Use breathable cloth.
• Don't stand it long-term. Feet and standing bolts on a full body can take it briefly; a torso's contact area cannot.
• Don't lean it in a corner for months. One edge carries all the load and will flatten.
• Don't store it wet or freshly cleaned. The most common cause of damage we see is a doll boxed up while still damp.
• Don't stack anything on top of it. Not even something light.

Travel and moving house

The original carton with its foam inserts is the right container — it was packed for exactly this. If you have discarded it, pad with soft cloth (not newspaper: print transfers) and make sure nothing can shift. A 22 kg torso sliding around in a car boot will scuff badly.

What storage damage looks like

Our warranty covers manufacturing and transit damage for three months — large-area damage is replaced, minor damage compensated proportionally. Gradual deformation from long-term poor storage is not a defect and is not covered. That is worth knowing before you put it somewhere hot, damp or under pressure.

Torsos ship in a plain unbranded carton labelled as household goods — read the discreet packaging guide. Browse all 43 models, from the 2.1 kg butt molds up to the 28 kg half body, with live pricing on every page.